Keep the can safely in the boot. If possible, remove the object that caused the puncture. Make sure the puncture is at the bottom. Entirely deflate the tyre. Shake can well before use. In cold weather, warm up the can, either in the hands or on the car’s heater. Screw the hose adaptor onto the cleaned tyre valve and remove the protecting cap from the aerosol can. Hold the can upright (with the valve and hose facing down!) and press the spray button until the tyre is filled. Check and, if necessary, adjust the tyre pressure. Immediately after application, drive for approx. 10 km at a maximum speed of 50 km/h to allow the product to spread evenly in the tyre. Drive on carefully and seek a garage for changing the tyre as soon as possible.
PLEASE NOTE: Not suitable for motorbike tyres and for tyres with valve sensors. Use product only as intended. Best before: 5 years. Date of manufacture: see bottom of can.
