Ensure good ventilation during use. Use at temperatures above +10 °C. Ideal application temperature: 20 °C-30 °C. Caution: Test fastness of re-sprayed surfaces first. Thoroughly clean the paintwork and polish as required with a polishing machine to a scratch-free and hologram-free deep shine. The surfaces must be absolutely clean immediately before sealing. For this, spray SONAX PROFILINE Prepare (02373000) onto a Microfibre Cloth soft touch (04510000) and carefully wipe all surfaces to be treated. Apply a few drops of CC One onto the bright side of an Application Pad and, working crosswise, apply thinly to the paintwork. The area to be treated should be about half a square metre (1/4 bonnet). After a short exposure time of approx. 3 to 5 minutes, wipe off excess product with a new SONAX Microfibre Cloth soft touch (04510000) or SONAX Coating Towel (04511000) to a streak-free finish. If the applicator starts to harden during the application of CC One, use a new pad. Treat the entire vehicle in this way and then allow the coating to cure for at least four hours. During this time, keep the vehicle in a clean and dry environment and do not touch the surfaces. The contents of the can are sufficient one application. Do not use on hot surfaces. Do not allow to dry. Do not wash the vehicle within the first 7 days after treatment. Important: Do not use highly alkaline cleaners, as these may attack the protective layer.
PLEASE NOTE: Ensure good ventilation during use.