Always pre-clean the vehicle with a strong water jet first. When using in high pressure washer with foam lance: Dilute with water at a ratio between 1:10 and 1:20, depending on the foam type desired (dry/wet). Finely adjust the dosing according to the required foam. When using in foam sprayer: Mix 15 to 25 ml of product per l of water. Apply the foam to the vehicle from bottom to top and rub with a wash sponge afterwards. Rinse thoroughly with clear water immediately. Manual wash: Foam 50-80 ml in 10 l of warm water. Wash vehicle with a sponge. Rinse thoroughly with clear water immediately. Do not use on hot surfaces. Do not allow to dry.
PLEASE NOTE: Protect against frost.
