Clean the textile surface and rinse thoroughly with water until the cleaner is rinsed off completely. Shake bottle. Before use, test for colour fastness and abrasion resistance in a small inconspicuous area. Be careful with repainted surfaces. Do not use on hot surfaces. Apply impregnation to an Application Sponge, apply to the dry surface and spread immediately in steady movements. If necessary, repeat treatment after a short drying period. Allow the object to dry completely. Afterwards, it should not get wet for at least 1 hour. The durability of the impregnation is improved by heat (e. g. sunlight, warm air) right after application.