Thoroughly clean the paintwork and polish as required with a polishing machine to a scratch-free and hologram-free deep shine. The surfaces must be absolutely clean immediately before sealing. For this, spray SONAX PROFILINE Prepare (02373000) onto a Microfibre Cloth soft touch (04510000) and carefully wipe all surfaces to be treated. Apply a few drops of CC Pro onto the bright side of an Application Pad and, working crosswise, apply thinly to the paintwork. The area to be treated should be about half a square metre (1/4 bonnet). Without further exposure time, wipe off excess product with a Coating Towel (04511000) to a streak-free finish. Treat the entire vehicle in this way and then allow the coating to cure for at least 2 hours. During this time, keep the vehicle in a clean and dry environment and do not touch the surfaces. If the applicator starts to harden during the application of CC Pro, use a new pad. The contents of the can are sufficient for two complete vehicles. Do not use on hot surfaces. Do not allow to dry. Do not wash the vehicle within the first 7 days after treatment. Important: do not use highly alkaline cleaners, as these may attack the protective layer.
PLEASE NOTE: Ensure good ventilation during use.