Thoroughly clean wraps. The surfaces must be absolutely clean immediately before sealing. For this, spray SONAX PROFILINE Prepare (02373000) onto a Microfibre Cloth soft touch (04510000) and carefully wipe all surfaces to be treated. Apply CC Vinyl+PPF the bright side of an application pad and, working crosswise, apply enough liquid to the paintwork. The area to be treated should be about half a square metre (1/4 bonnet). As many films are highly absorbent, make sure to apply the product evenly to avoid stains or clouds (high spots). Wipe off excess product immediately with a SONAX Coating Towel (04511000) without leaving streaks. If the applicator starts to harden during the application, simply use a new pad. Treat the entire vehicle in this way and then allow the coating to cure for at least 6 hours. During this time, keep the vehicle in a clean and dry environment and do not touch the surfaces. For the product to work effectively and to ensure a complete reaction with the film, we recommend leaving the coating to rest for 12 hours.
PLEASE NOTE: Ensure good ventilation during use.