Ensure good ventilation during use. Use at temperatures above +10 °C. Ideal application temperature: 20 °C–30 °C. Test fastness of re-sprayed surfaces first. Thoroughly clean the paintwork and polish it with a machine to a high-gloss finish — without any holograms. The surface needs to absolutely clean before sealing it. Spray SONAX PREPARE onto a Microfibre Cloth soft touch and thoroughly wipe all the surfaces to be treated. Then, thinly apply the BASECOAT 1 using the enclosed Application Pad (softside). For sensitive paint surfaces, also use the enclosed fine Microfibre Cloth, by wrapping it around the Pad without any wrinkled. Always treat small partial surfaces (approx. 1/2 bonnet or 1/2 m2) in crisscross sequence. After a short drying time (30 seconds to 1 minute at most), wipe the treated surfaces with a clean Microfibre Cloth soft touch to a streak-free finish Treat the complete surface to be sealed this way and afterwards allow product to curefor at least 1 hour; make sure the surfaces are not touched and do not get wet during this time. After the prescribed curing time, apply the GLOSSCOAT 2 to achieve a superior smoothness and deep shine. For this, spray the product onto the enclosed Application Pad (soft side) and spread over all surfaces. Here, you can treat areas of a half bonnet in size, which then need to be wiped over with a Coating Towel to remove excess product. Do not use on hot surfaces. Do not allow to dry. Do not wash the vehicle within 1 week after application.
PLEASE NOTE: Protect against frost.