Ensure good ventilation during use. Use at temperatures above +10 °C. Ideal application temperature: 20 °C–30 °C. Test fastness of re-sprayed surfaces first. After polishing the paint, the cleaner PREPARE is sprayed onto a Microfibre Cloth soft touch to wipe and prepare the paintwork for the coating. Then, CC Evo is applied in two stages. In the first step, BASECOAT Evo is applied thinly to partial surfaces using an applicator sponge. After a short drying time, wipe off the excess product with a Microfibre Cloth soft touch, and then proceed with the next partial area. After a waiting time of 1 hour, GLOSSCOAT Evo is applied thinly with a new applicator sponge. The drying time should be a few up to ten minutes. Then, remove excess product with a Coating Towel. If the product begins to harden in the sponge when treating large vehicles, please use a new Application Sponge. Once completely treated, leave the vehicle in a dry place for at least 4 hours; it must not get wet during this time. Ideally, the vehicle is left in a room overnight. Do not use on hot surfaces. Do not allow to dry. Do not wash the vehicle within 1 week after application. Important: do not use highly alkaline cleaners, as these may attack the protective layer.